Features

Descriptions

Set Delay

Set time delay on the selected frame. Selected frame will pause for the amount of time that you have set in place. This feature is used to match the timing of the visual with that of the audio presentation. (If a frame contains a lengthy amount of information and requires time for the viewer to read, set delay should be set to allow the viewer to have sufficient time to read and hear the material. Generally, adjusting the set delay to pause for 1 or 2 seconds plus the material time length is known to be sufficient. )

Cut Frame

Cut selected frame and stores it into the temporary buffer. Used just like a typical cut & paste method.

Copy Frame

Copy and store selected frame into the temporary buffer. Used just like a typical coping method.

Paste Frame

Paste cut or copied frame(s) stored in the temporary buffer.

Delete Frame

Delete selected frame.

Delete Previous Frame

Delete all frames before the selected frame.

Delete Next Frame

Delete all frames after the selected frame.

Tip

Selecting multiple frames

To select multiple frames, choose the First Frame from the Slide Browser and verify that it is highlighted with the yellow border. Now Hold-Down the ShiftKey and choose the Last Frame you want to select on the slide browser. You will see that multiple frames are now highlighted and the mouse pointer has changed to a pointing hand as shown is figure below.

Tip

Merging multiple movies

When you’re merging two movies:

• Two movies have to be recorded under the same screen quality and resolution.
• Set “View Slide” to “All frames.
• Click the first frame, hold down the Shift key, and, Click the arrow button at the end of the slide until you see the last frame you want to select .
• Copy those selected frames and paste them to other movie